Channel Plus Video Amplifiers
DA-500A
18 dB Video Amplifier |
|
|---|
- 18 dB of gain
- For cable or antenna signals
- Extruded aluminum shell
- Robust power supply and greater EMI rejection
- Includes grid mounting ears for the 2619 and Open House enclosures
- Fully compatible with HDTV Television signals.
- Installation Manual (PDF)
| |
|
DA-506BID
1 x 6 Video Amplifier |
|
|---|
- For cable or antenna signals
- Extruded aluminum shell
- One input for CATV or off-air antenna
- Six outputs to televisions (Four outputs are for televisions up to 75’ away and 2 outputs can be used up to 150’ away)
- Bi-directional capabilities, using a 5-42 MHz return path on the ant/CATV input. This allows compatibility with interactive CATV set top boxes.
- Includes grid mounting ears for the 2619 and Open House enclosures
- Fully compatible with HDTV Television signals.
- Installation Manual (PDF)
| |
|
DA-550BID
DA-550HHR
3 x 8 Video Amplifier
w/12V IR Engine |
|
|---|
- For cable or antenna signals
- Extruded aluminum shell
- Designed with the highest headroom available in a distribution amplifier
- Three inputs for CATV or off-air antenna and two from modulators
- Six outputs to televisions up to 150’ away
- DA550BID: offers a 5-42 MHz return path for bi-directional communication for use with digital cable interactive set-top boxes
- DA550HHR is used with high performance antenna applications for off-air digital and NTSC signals
- Optional IR control of connected video sources and whole house IR intergration with a 12 volt bi-directional IR engine. By adding a 2100A wall plates and a 12 volt target to the coax run of any room and allows IR signals to be routed to either a 2010 wall plate, 5500 series or SVM series modulator or intergrated into an exsisting IR system.
- Includes grid mounting ears for the 2619 and Open House enclosures
- Fully compatible with HDTV Television signals.
- Installation Manual (PDF)
| |
|
DA-8200BID
DA-8200HHR
3 x 8 Video Amplifier
w/5V IR Engine |
|
|---|
- For cable or antenna signals
- Extruded aluminum shell
- Designed with the highest headroom available in a distribution amplifier
- Three inputs for CATV or off-air antenna and two from modulators
- Six outputs to televisions up to 150’ away
- DA8200BID: offers a 5-42 MHz return path for bi-directional communication for use with digital cable interactive set-top boxes
- DA8200HHR is used with high performance antenna applications for off-air digital and NTSC signals
- The DA-8200 series offers optional IR control of connected video sources and whole house IR intergration with a 5 volt IR engine. The easy to use 2133 target connects directly to the coax run of any room and allows IR signals to be routed to either a 2010 wall plate, 5500 series or SVM series modulator.
- Includes grid mounting ears for the 2619 and Open House enclosures
- Fully compatible with HDTV Television signals.
- May be remotely powered from up to 75 feet away by using a remote wall plate model 2010 or any 5500 series or SVM series modulator.
- Installation Manual (PDF)
| |
|
|
